Benching > Depth - 156 in

Benching is an open-plan desking system built around a linear, shared-surface run where multiple occupants work side by side along a continuous spine. The spine carries power and data for 4, 6, 8, 10, or 12 paired users depending on the run length ordered. Benching fits call center, agency, technology, coworking, and other high-density open-plan settings where low visual barrier heights and frequent reconfiguration are priorities over individual acoustic separation. It differs from cubicle systems primarily in barrier height, cost per seat, and the speed at which a run can be reconfigured or extended.

Worksurface depth per user runs 24 to 30 inches, and worksurface width per user runs 48 to 66 inches depending on the series and configuration selected. Spine length scales to the occupant count and run direction planned for the space, whether a straight run or an angled configuration. These dimensions should be checked against the room floor plan grid and the location of the power and data chase before a series is finalized, since spine length and power routing both depend on the final occupant count settled on for each run.

Low fabric or acrylic screens, typically 12 to 24 inches above the worksurface, provide visual separation between adjacent seats without fully enclosing any single position. Side returns or wing screens add lateral privacy where the layout requires it for particular roles. Screen height should be checked against the seated eye line and against the facility's broader acoustic strategy for open-plan space, since fabric screens generally absorb more sound than acrylic and may be preferred where noise reduction matters more than sightline control across the floor.

Benching spine channels carry integrated power raceways with NEMA outlets and USB charging points distributed at each user position along the run. The modesty panel often houses surface-mounted outlet and USB modules for easy reach without bending under the surface during the workday. Power density — outlets per seat and USB-A or USB-C charging wattage — should be checked against the technology load expected at each position before a series is selected, since density varies meaningfully across different manufacturers and product lines.

Thermally fused laminate worksurfaces on painted-steel or powder-coated aluminum frames are standard for commercial-duty benching installations. Thermofused melamine variants appear in value-tier specifications where budget takes priority over higher-cost finish options. Frame finish and worksurface laminate family need to coordinate across the full run length, since mismatched batches are visible along a continuous spine in a way they would not be on separate individual desks placed apart from one another. Material family should be checked against the facility's broader finish standard before ordering.

Benching typically costs less per seat, reconfigures faster, and uses a lower visual barrier height than full cubicle systems built with taller panels. Cubicles remain the better fit where a function requires acoustic separation and individually enclosed work zones for concentrated tasks. The choice between the two comes down to the intended use zone — a high-density, collaborative environment favors benching, while functions requiring focused, private work favor cubicle-level enclosure and greater barrier height between neighboring positions. Facilities running mixed floor plans often deploy both, benching for open collaborative teams and cubicles for roles needing sustained concentration.

A BIFMA X5.1-compliant task chair with casters matched to the floor finish — hard-floor or carpet — pairs well with benching runs of any length. Task chair seat height should align with the benching worksurface height, typically 29 to 30 inches from floor to surface. Positions with intensive daily occupancy benefit from an ergonomic task chair with lumbar, seat depth, and arm adjustments rather than a basic stacking or guest chair, since benching seats are typically occupied for full workdays across a five-day week.

Replacement worksurface tiles, spine segments, screen brackets, and power channel covers are the standard serviceable components across benching lines sold commercially. Each series lists available add-on components for run extension on its product page for planning purposes. Add-on component availability should be checked against the facility's change-management plan, particularly for growing teams that expect to extend a run without replacing the entire system down the line as headcount increases over the following years. Confirming part compatibility with the original series avoids a mismatched finish or profile when a run is extended well after the initial installation.

Commercial benching systems tested to applicable BIFMA standards carry extended structural warranties relative to consumer-grade desking, and we offer a Free Lifetime Warranty unless specifically noted. Coverage extends to the frame welds, spine channels, worksurface substrate, and screen hardware installed along the run. Warranty terms should be checked against the facility's procurement standard before finalizing a large open-plan order, since consistent coverage across a full floor matters for long-term maintenance planning and budget forecasting across every seat installed on that floor.

ADA deployments of benching call for a minimum 27-inch knee clearance under the worksurface at each user position, along with 30 by 48 inches of clear floor space for a wheelchair user to approach the position. The standard worksurface height of 29 to 30 inches falls within the ADA accessible seated work range without modification. The accessible position within a run should be documented against the facility's ADA compliance plan, and a height-adjustable segment can be specified at that position if variable-height access is required for the occupant.