Coffee Tables > Made in USA

A coffee table functions as the center table within a lobby or lounge soft-seating arrangement. Selection depends on length and depth relative to the seating cluster, height — typically 16 to 20 inches — tabletop material, and base style, all coordinated with the surrounding soft-seating family. The table anchors the seating group visually and functionally, giving occupants a surface for reading material or beverages without requiring a side table at every position, and its dimensions and finish are typically specified as part of the same order that establishes the sofa, loveseat, and end table selections.

Length runs 36 to 60 inches, depth 18 to 30 inches, and height 16 to 20 inches off the floor. Coffee table height sits intentionally below sofa seat height, typically 17 to 19 inches, allowing unobstructed seated reach across the table from a soft-seating position. Rectangular tables commonly run 36 to 48 inches by 24 inches, square tables 30 to 36 inches per side, and round tables 30 to 36 inches in diameter. These dimensions should be checked against the seating cluster's footprint and the anticipated traffic pattern through the lobby before a size and shape are finalized.

Wood veneer over an engineered core suits executive lobby settings. High-pressure laminate fits hard-use waiting rooms. Tempered glass suits modern lobby aesthetics, metal fits an industrial design direction, and stone — granite, marble, or quartz — suits higher-tier executive programs. Tabletop material should be selected in coordination with the rest of the soft-seating family rather than in isolation, since a mismatched surface material is one of the more visible inconsistencies in a furnished lobby, and heavier stone tabletops typically require freight delivery rather than standard parcel shipping.

A single shelf base supports under-table magazine storage. A two-tier construction supports decorative display. A solid pedestal base suits a minimal design direction. Base selection should follow the lobby's overall visual program — a shelf base adds function in higher-traffic lobbies where reading material accumulates, while a pedestal base suits a cleaner aesthetic where storage is not a priority. Rectangular models most commonly offer the shelf option, while round and small square models typically maintain an open base to preserve a lighter visual silhouette.

Coffee table tops carry a rated load of 50 to 75 pounds, evenly distributed. That capacity accommodates magazines, beverages, decorative trays, and the typical contents found on a lobby coffee table. The rating should be checked against anticipated use — tables intended to hold heavier decorative objects or serve double duty as a display surface warrant confirmation of the specific model's rated load capacity before those items are placed, since the top load rating differs from the shelf load rating on two-tier constructions.

Matching top material and base style between the coffee table and end table maintains a coordinated soft-seating family. Coffee table height, 16 to 20 inches, sits below end table height, typically 22 to 26 inches, producing a consistent sight line across the seating group that also aligns with typical chair arm height. Ordering both tables from the same product line and the same purchase order avoids finish and proportion mismatches that can occur when pieces are sourced independently from different collections or ordered months apart.

A 3mm PVC edge band is the standard specification, with a 2mm matching edge available on value-tier models. Wood veneer tops receive a matching wood edge band, while stone tops receive an eased or beveled stone edge profile. Edge profile is a smaller detail relative to top material or base style, but it affects both the table's tactile feel and its resistance to chipping under daily contact in a high-traffic lobby, and it should be checked against the edge treatment specified on the matching end table for visual consistency across the set.

A coffee table at the standard 16 to 20-inch height sits appropriately in front of a soft-seating cluster without obstructing seated reach. A 36-inch accessible path should be maintained between the coffee table and the adjacent soft-seating piece to support wheelchair movement through the lobby. The table's footprint should not encroach on that accessible aisle, a check that should be made during furniture layout planning rather than after the pieces are placed, since repositioning a heavier stone-top table after delivery is considerably more disruptive than confirming clearance in advance.

Commercial coffee tables tested to the applicable BIFMA standard typically carry a 10 to 15-year warranty across the industry, compared with 1 to 3 years for consumer-tier tables, but we offer a Free Lifetime Warranty unless specifically noted. Coverage extends to the tabletop, base, leg leveling glides, lower shelf where ordered, and edge profile. Warranty scope should be confirmed at the time of specification, particularly for high-traffic lobby settings where tables see frequent contact from foot traffic, beverages, and repeated repositioning.

The coffee table top at 16 to 20 inches falls within the ADA forward-reach range, and a 36-inch accessible path should be maintained between the coffee table and the adjacent soft-seating piece. Table placement should not obstruct the accessible aisle running through the lobby. Facilities planning a mixed-ability seating cluster should confirm this clearance during layout rather than after the furniture arrives, since repositioning heavier stone-top tables after delivery is far more disruptive than confirming the plan in advance with accurate floor measurements.