Reception Desks > Materials - Glass

A reception desk pairs a staff worksurface with a transaction counter raised 12 to 16 inches above it, producing a total front-face height of 42 to 46 inches. That raised counter gives visitors a writing surface while screening staff equipment from view. The format also supports phone systems, package handling, and visitor signage within a single integrated piece rather than a collection of separate furnishings. Transaction-counter height and overall front-face height are listed per SKU on the product page. Facilities weighing a standard desk against a reception desk should consider visitor volume, since walk-in traffic benefits most from the counter's screening and signage functions.

ADA calls for a transaction surface no higher than 36 inches above finished floor across at least 36 inches of width, with a 17 to 19-inch reach over the counter for a seated visitor. Frontal foot clearance must run 17 to 25 inches deep and 30 inches wide. An ADA-compliant lowered section is recommended on every primary reception desk regardless of jurisdiction, since the lobby serves the full range of visitors a building receives. Section width and height for the accessible portion are listed on the product page for each model.

Placement requires a 36 to 48-inch behind-desk staff zone for chair clearance and circulation, plus a 60 to 96-inch front-of-desk visitor approach zone that includes a 60-inch wheelchair turning radius. High-traffic lobbies warrant additional approach width beyond these minimums. The product page lists desk dimensions; lobby planning references in the buyer's guide address circulation envelopes scaled to visitor volume. Facilities with heavier walk-in traffic or multiple simultaneous visitors should plan toward the upper end of these ranges. Facilities anticipating growth in visitor volume should plan clearance at the upper end of these ranges from the outset rather than retrofitting later.

Reception desks come as stand-alone units (a single linear segment), L-shaped units (a main desk plus a return for dual-zone workflow), or U-shaped units (a main desk plus two returns for high-volume staff support). Format selection should follow daily workflow rather than aesthetic preference alone. Configuration is identified by SKU on the product page, and the comparison guide details where each format is most effective. A single receptionist handling walk-ins and phones typically suits a stand-alone or L-shaped unit, while multi-staff or high-volume lobbies call for the U-shaped format.

Commercial reception desks use high-pressure laminate or thermally fused laminate over an engineered core, finished with 3mm PVC edge banding, and carry surface load ratings of 200 to 300 pounds across the worksurface. Higher-tier lines add veneer panels on the front transaction face for a client-facing finish. Material grade, edge profile, finish family, and surface load are listed per SKU on the product page. Lobbies with heavy transaction-counter contact should favor high-pressure laminate over thermally fused laminate for longer surface life.

Reception desks accept matching mobile pedestals for staff-side document storage, lockable transaction-side drawers for visitor logs and signage, and grommet-mount cable routing for phone, printer, and signage power. Higher-tier configurations add a transaction-side card-reader well, a package storage compartment, and an ADA-compliant lower section. Integration options are listed per SKU on the product page. Lobbies handling routine deliveries benefit from the package compartment; those managing visitor credentials benefit from the card-reader well. Facilities managing frequent courier deliveries should prioritize models with the package compartment; those requiring visitor credentialing should prioritize the card-reader well.

A complete reception desk ships in 2 to 5 cartons via LTL freight, with total carton weight running 120 to 450 pounds depending on configuration. Inside delivery and assembly through a dealer network are recommended for client-facing lobbies, since the install should be complete before business hours resume. Installation runs 2 to 5 hours with two people, depending on configuration complexity. Facilities on a tight opening timeline should confirm inside-delivery scheduling well ahead of the target date. A pre-installation site walk-through, confirming dock access and elevator dimensions where applicable, reduces the risk of delay on delivery day.

A 60-inch primary visitor approach in front of the transaction counter accommodates the ADA wheelchair turning radius, while a 36 to 42-inch staff aisle behind the receptionist allows chair roll-back. A 48-inch cross-traffic corridor is needed where visitors must pass the desk to reach an interior door. Combined with a 60 to 96-inch desk width, a stand-alone reception layout typically requires roughly 100 to 150 square feet of lobby area. These figures should be checked against the specific desk's dimensions before finalizing a floor plan.

BIFMA-compliant reception desks carry structural warranties of 10 to 15 years as the industry standard, and we offer a Free Lifetime Warranty unless specifically noted. Reception desks see high-touch wear at the transaction surface, which makes warranty terms and parts support a meaningful factor in procurement. Active production lines support replacement keys, hardware kits, transaction-counter panels, and matching add-on units throughout the warranty period. Production status for each model is noted on the product page, useful when ordering additional matching units later.

ADA-compliant transaction surfaces call for a maximum height of 36 inches from finished floor, a minimum width of 36 inches, and a 17 to 19-inch reach over the counter, allowing a seated visitor to sign documents or hand papers across. The standard reception transaction counter sits 12 to 16 inches above the 29 to 30-inch staff worksurface, producing a 42 to 46-inch overall front face. A recessed accessible section, or lower transaction shelf, meets ADA requirements on the visitor side while the remainder of the desk keeps the standard counter height.