Before your panel run is complete, a metal filler becomes relevant when a 42-inch-high panel meets a 66-inch-high panel. That change in height creates a narrow, specific area to address: the outside of the taller panel above the shorter panel. If that transition is left to improvisation, your connected layout can look interrupted at the exact point where two panel heights meet. This accessory is made for that transition, covering the outside of the 66-inch panel above the 42-inch panel when the two are connected. You can evaluate it as a connection component for a specific height change.
The metal filler measures 2 1/2-inch wide by 29/80-inch deep by 24-inch high. The stated dimensions identify the filler by width, depth, and height for your planning records. The connection is specified between a 42-inch-high panel and a 66-inch-high panel, with the filler covering the outside of the 66-inch panel above the 42-inch panel. This placement describes the transition point your plan must account for when those two panel heights are connected.
For your layout planning, identify the location where a 42-inch-high panel connects to a 66-inch panel, then specify the 24-inch metal filler for the transition. The filler covers the outside of the taller panel above the shorter panel, so your ordering notes can identify both panel heights and the side receiving coverage. Its 2 1/2-inch width and 29/80-inch depth give your team the dimensional information needed to review the connection. The 24-inch height corresponds to the vertical portion described for this transition. Keep those measurements with your panel schedule so the selected accessory matches the connection being built. When your project depends on joining these two panel heights, this metal filler gives you a precisely identified component to carry from planning into the final specification.