You can place this L-shaped desk shell in a 66-inch by 66-inch layout where the return supports guests, secondary screens, or reference material beside your main surface, with slim-depth tops that pull the footprint in from a full-depth shell. At 29 1/2-inch seated height, the worksurface lines up with standard task seating so you can standardize chairs across the floor. The unit is finished to coordinate with other desks, storage, and reception pieces in the same laminate program.
Construction centers on 7/8-inch-thick worksurfaces with 3/4-inch-thick end and modesty panels finished in thermally fused melamine. Exposed edges carry 3mm PVC edge banding matched to the laminate so bumps at the perimeter do not chip bare core. Drawer fronts use thermally fused melamine faces, and drawer boxes use black vinyl board interiors with a finished bottom panel. Reinforced metal brackets in the shell add stiffness under sustained desktop loads. Integrated wire-management grommets route power and data through the so you can keep cords off the worksurface. Adjustable leveling glides provide up to 1/2-inch of height compensation on uneven floors.
This shell configuration leaves the storage layout open so you can add hanging or freestanding pedestals that match your filing plan. Available in Aspen, Coastal Gray, Cherry, Espresso, Mahogany, Maple, Modern Walnut, Newport Gray, and Silver Birch. Finishes coordinate across the line so you can match workstations, reception, storage, and conference pieces. Order the configuration that matches your filing mix and footprint so the station arrives ready to place in the room plan you already drew. Because the laminate program is shared across matching storage and reception pieces, you can stage a multi-room floor without mixing edge profiles. Keep the primary monitor, task light, and active folders on the main span so you are not walking to a side table mid-task.
Ships ready for easy assembly.
Ships ready for easy assembly