Seating > Materials - Wood

The Seating category spans sofas, loveseats, club chairs, lounge chairs, benches, ottomans, modular soft seating, and healthcare seating used in lobby, reception, waiting, collaborative, and hospitality environments. Subtype selection should be matched to occupant count, seating arrangement, use environment, and upholstery maintenance requirements before a series is chosen. A clinical waiting room and a corporate lobby, for example, call for different subtypes given differing sanitation and traffic demands. Facility planners furnishing a mixed-use space should select subtypes zone by zone rather than applying one seating type uniformly across the entire footprint.

A single club chair runs 22 to 32 inches wide, a loveseat runs 46 to 58 inches wide, and a sofa runs 60 to 96 inches or more in width. Seat height sits 16 to 20 inches off the floor, with depth running 22 to 30 inches. Depth should be checked against the room footprint, and a 36-inch traffic-flow clearance should be maintained around each seating piece. This clearance figure alone often determines how many pieces fit comfortably within a given lounge or lobby zone.

Commercial seating is rated to the BIFMA X5.4 lounge seating standard, suited to lobby and waiting room use across 8-hour daily occupancy, well beyond what residential seating built for occasional use can withstand. Weight rating per seat position is listed on the product page and should be checked against the occupant weight range expected in the space. Frame construction, foam density, and upholstery weight are all engineered to this heavier duty cycle. Facility planners expecting high daily visitor counts should default to commercial-rated seating rather than residential seating, given the significant gap in duty-cycle engineering between the two.

Commercial fabric, rated to 100,000 or more double rubs, suits corporate and hospitality lobby settings. Commercial vinyl or antimicrobial vinyl suits healthcare waiting rooms, clinics, and high-sanitation environments. Bonded leather suits mid-tier executive reception settings, while top-grain leather suits higher-end executive lobbies. Frame construction runs kiln-dried hardwood or steel, matched to the commercial duty rating required for the space. Facility planners should weigh daily cleaning protocol as heavily as visual preference when selecting upholstery, since the wrong material choice raises maintenance costs over time.

Most commercial lobby seating arrives fully assembled or requires leg attachment only. Modular soft-seating systems require panel-to-panel connection using included hardware. Sofas and loveseats at 60 to 96 inches wide require a second person and adequate room-access clearance for placement. The floor glide set — hard-floor versus carpet — should be matched to the room's floor finish before the piece is set in place. Facility planners should confirm floor type before ordering, since the wrong glide set can scratch hard flooring or fail to grip carpet properly.

Club chairs and sofas anchor lobby and reception soft-seating clusters. Healthcare seating with antimicrobial vinyl and bariatric weight ratings suits clinical waiting rooms. Modular seating fits collaborative zones and lounge areas in open-plan layouts. Bench seating suits high-density waiting positions in lobbies and reception areas. Seating type should map to the zone it serves and the traffic pattern expected there. Facility planners should also confirm weight rating and upholstery grade align with the specific traffic pattern expected in each zone before finalizing selections.

Upholstery — fabric, vinyl, or leather — should be checked against the cleaning protocol and traffic intensity expected. Frame construction should be compared against the weight rating requirement for the space. Seat height should be checked against ADA accessible height requirements where applicable. Modular versus fixed configuration should be weighed against how often the room gets reconfigured. Each variable is documented per series on the product page. Facility planners comparing similar-looking models should request construction specifications directly, since appearance alone does not reliably indicate frame or foam quality.

Replacement glide sets, seat cushion cores, and upholstery panels are the primary serviceable components for commercial seating. Available replacement components are identified by series on the product page. A re-upholstery option is available for higher-tier leather seating in executive lobby settings where aesthetic maintenance is part of the facility management plan over the piece's service life. Facility planners maintaining leather seating in high-visibility lobbies should budget for periodic re-upholstery as part of long-term facility maintenance planning. Facility planners should confirm re-upholstery turnaround time with the manufacturer before committing to a refresh schedule for high-visibility lobby pieces.

Commercial seating tested to the BIFMA X5.4 standard carries a warranty of 10 to 15 years, well beyond the 1 year typical of residential seating, and we offer a Free Lifetime Warranty unless specifically noted. Coverage extends to the frame, the seat foam, the upholstery, the leg glides, and the modular connection hardware. Warranty records should be retained centrally alongside procurement documentation for every seating purchase across a facility, which streamlines future claims and replacement part orders. This centralized record-keeping also speeds replacement-part ordering when a specific component reaches the end of its service life.

A seat height of 16 to 18 inches suits accessible lobby and waiting room seating, since seats below 14 inches become difficult for wheelchair transfer. A minimum 30 by 48-inch clear floor space at each accessible seating position allows a wheelchair user to pull alongside. A 36-inch accessible path should be maintained between seating pieces per ADAAG requirements, with roughly one open wheelchair space planned for every 4 to 6 fixed seats in a cluster. Facility planners should periodically confirm this seating arrangement has not been altered in ways that reduce accessible clear floor space over time.